|
Title: Scratches Post by: walks on October 29, 2006, 08:58:54 AM G'day,
Does anyone know of a good way to get out scratches, or the name of anyone that could. The scrathes are only light/medium scratches in my clear coat. I have already tried maquires fine cut with some degree of luck. :-[ Cheers Walks Title: Re: Scratches Post by: Rusty_T on October 29, 2006, 10:35:41 AM Walks
Talk to Alfio. He's on this forum as "The Love God" Cheers Rusty Title: Re: Scratches Post by: Addo on October 30, 2006, 07:57:24 AM A good machine buff would help. If not you could try some 'ultra fine' wet n dry paper with some clean soapy water and using a soft colour block lightly rub them out. Then finish with a cutting compound with a buff (or by hand) then polish. This is all any shop would do. Mind you if you cut through the clear you'll need to reclear or maybe repaint the panel so go easy unless your sure you have plenty of clear on there.
Addo. |