|
Title: HR Sedan trans tunnel brace Post by: Glenn 'Stinky' Stankevicius on February 23, 2014, 10:59:23 AM I am after the under floor brace in the trans tunnel to repair my son's car.
The previous owners attempt at a 4 speed conversion has left the original one in tatters. Cheers Title: Re: HR Sedan trans tunnel brace Post by: hsv-001 on February 23, 2014, 11:32:46 AM Has the floor been lifted ? I guess you are talking about the subframe section over the gearbox .We cut these and fabricated them in three pieces for years , then when re-lifting my floor for the BorgWarner 5 speed I noticed an old 14" rim under the bench and decided that the centre step on the rim looked like what I had been fabricating for years ,so I cut about 2/5 of it and used that for a replacement subframe section . Haydn
Title: Re: HR Sedan trans tunnel brace Post by: Glenn 'Stinky' Stankevicius on February 23, 2014, 03:44:32 PM Thanks Haydn, I got lucky on the FB/EK forum and someone was unpicking one from a tunnel, SCORE!
Title: Re: HR Sedan trans tunnel brace Post by: hsv-001 on February 23, 2014, 04:07:38 PM Yes, Its amazing what some people keep . I have one in the rafters of my shed for a FJ ,carefully unpicked . Haydn
|