News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

sill panel's.

Started by COL58FE, November 30, 2006, 11:51:03 AM

Previous topic - Next topic

COL58FE

g'day,
          just need info about sill panel's,
 are they all the same for fe/fc/fb/ek
all body style's.
col. ::)

collecta

Hi Col,
as far as im aware the sedan and wagon genuine sills are the same and ute and van are alike, as the sedan/wagon have the four door openings and the van/ute have just the two. I have a nos sedan one i want to make fit a van.

cheers
Scott
i collect old holdens coz they never die!

mcl1959

Actually the sills are the same right across the board.  If you look carefully inside the rear quarter on a ute you will see the place where the scuff plate is attached to where the rear door would be.  The ute and van rear quarter panel extends down and is spot welded to the sill panel on the edge of the door opening.

Ken

collecta

  Thanks for that explanation Ken.


cheers
Scott
i collect old holdens coz they never die!