Electrical Connector

[Jolls]

Hi Team,

I have started on the wiring harness of the ute. None of the accessory, indicator or courtesy lighting circuits exist so I need to run them. I have located that right bullet connectors and joiners at Vintage Wiring Hannesses; however, I haven't been able to locate a supplier for the 90 degree uninsulated U terminals that are used on the light switch and a few other places. Does anyone have a lead on a supplier?



Cheers n Beers
Craig

[Dr_Terry]

Do you mean these ones ?

https://www.rolan.com.au/narva-non-insulated-flag-terminal-6-3x0-8-mm-pack-of-100-56228.html?gad_source=1&gad_campaignid=18316373008&gbraid=0AAAAABMEhvsbTzgAgOmsiKlhjFqLT6Uz1&gclid=Cj0KCQjw4qHEBhCDARIsALYKFNOVLzjlvcuwaaYDLqmUBXiJIxEjEdItLhxJLLuPjwUSLqm0PhjQkOoaAlBfEALw_wcB

Dr Terry

[Gman]

These are what I use

https://www.digikey.com.au/en/products/detail/te-connectivity-amp-connectors/36270/293082?gclsrc=aw.ds&gad_source=1&gad_campaignid=22258692864&gbraid=0AAAAADrbLljVcR4zFU2tcmrnb4o60AOdQ&gclid=Cj0KCQjw4qHEBhCDARIsALYKFNM5jBOYxNsHTV5BOTJwPf16ZRgcA0QYJ8RluaIv7CKmbxWApGNaRR0aAoqIEALw_wcB

[Jolls]

Do you mean these ones ?

https://www.rolan.com.au/narva-non-insulated-flag-terminal-6-3x0-8-mm-pack-of-100-56228.html?gad_source=1&gad_campaignid=18316373008&gbraid=0AAAAABMEhvsbTzgAgOmsiKlhjFqLT6Uz1&gclid=Cj0KCQjw4qHEBhCDARIsALYKFNOVLzjlvcuwaaYDLqmUBXiJIxEjEdItLhxJLLuPjwUSLqm0PhjQkOoaAlBfEALw_wcB

Dr Terry

Thanks Dr Terry, but no. I need the ones in the photo that are U shaped instead of apde terminals. Looks like Gman has come up with an alternate solution.

Cheers
Craig

[Jolls]

These are what I use

https://www.digikey.com.au/en/products/detail/te-connectivity-amp-connectors/36270/293082?gclsrc=aw.ds&gad_source=1&gad_campaignid=22258692864&gbraid=0AAAAADrbLljVcR4zFU2tcmrnb4o60AOdQ&gclid=Cj0KCQjw4qHEBhCDARIsALYKFNM5jBOYxNsHTV5BOTJwPf16ZRgcA0QYJ8RluaIv7CKmbxWApGNaRR0aAoqIEALw_wcB

Thanks Gman,

I wasted a couple of hours last night searching for something that would work. I'll get some ordered in.

Cheers

[Jolls]

These are what I use

https://www.digikey.com.au/en/products/detail/te-connectivity-amp-connectors/36270/293082?gclsrc=aw.ds&gad_source=1&gad_campaignid=22258692864&gbraid=0AAAAADrbLljVcR4zFU2tcmrnb4o60AOdQ&gclid=Cj0KCQjw4qHEBhCDARIsALYKFNM5jBOYxNsHTV5BOTJwPf16ZRgcA0QYJ8RluaIv7CKmbxWApGNaRR0aAoqIEALw_wcB

I ordered a bit of other stuff to avoid paying the US shipping fee of $24 - a bunch of ferrules for the sparky side of our business and a few straight terminals of different sizes did the trick. So got a bunch of stuff sort of free instead of paying postage. As close to a win as you can get I guess.