FE-FC Holden Discussion Forum
March 30, 2024, 02:30:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Leaking Master??  (Read 3086 times)
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 947


Aussie adventure


View Profile
« on: January 26, 2023, 09:17:59 AM »
0

Good Morning. Happy Australia Day.
My reservoir on the clutch keeps going done. I cant find any leak anywhere. Nothing on the firewall. Nothing on the fittings either on the master or the slave cylinder. and slave cylinder is dry??  I didn't know brake fluid could evaporate. Smiley Tongue Huh
Logged

You can never have too many!
Port Macquarie NSW
ardiesse
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 1288



View Profile
« Reply #1 on: January 26, 2023, 02:38:51 PM »
0

Brake fluid does evaporate, but very slowly at room temperature.  Instead -

Unbolt the mater cylinder from the firewall and move it forward just enough so you can get your finger in behind and wipe the rear of the master cylinder.  Are there any traces of brake fluid on your finger?

Get under the car, unhook the rubber boot from the slave cylinder body, and look inside the boot.  Is it wet?

"Yes" to either means the cylinder in question is leaking.

Rob
Logged

Remember: if your Holden's not leaking oil, it doesn't have any.
Harv
Guru
*****
Offline Offline

Model: other Holden
Posts: 1318


View Profile
« Reply #2 on: January 26, 2023, 03:50:03 PM »
0

Grace's ute had a similar problem. It used to leak inside the car (along the pushrod) and dribble onto the floormat. A stainless liner in the cylinder fixed it.

Cheers,
Harv
Logged
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 947


Aussie adventure


View Profile
« Reply #3 on: January 26, 2023, 07:59:47 PM »
0

Nothing anywhere???
WTF
Logged

You can never have too many!
Port Macquarie NSW
Harv
Guru
*****
Offline Offline

Model: other Holden
Posts: 1318


View Profile
« Reply #4 on: January 27, 2023, 09:11:40 AM »
0

Does it drop any fluid if parked for a week or so on clean concrete (or concrete with newspaper taped down to make a clean surface)?

Have you accidently mistraced the lines, and it's really the brake master cylinder which is losing level (I've done that before  Roll Eyes).

Cheers,
Harv
Logged
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 947


Aussie adventure


View Profile
« Reply #5 on: January 27, 2023, 11:38:36 AM »
0

 Grin Grin No Harv... but i wouldn't put it past me.
It has an oil leak but no other ones
Logged

You can never have too many!
Port Macquarie NSW
DougT
Junior Member
**
Offline Offline

Model: FE
Posts: 85



View Profile
« Reply #6 on: January 27, 2023, 04:43:49 PM »
0

Have you checked to make sure the slave cylinder push rod adjusting nut lock nut is tight and not allowing the adjusting nut to unscrew thereby lengthening the slave cylinder piston travel which would reduce the fluid level in the reservoir? Just a thought. Doug
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.036 seconds with 20 queries.