FE-FC Holden Discussion Forum
June 28, 2024, 04:10:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Need help with my fe ute. It pulls to the right when I brake  (Read 2839 times)
perth_fe_ute
Junior Member
**
Offline Offline

Posts: 30


View Profile
« on: November 13, 2008, 12:41:39 AM »
0

Hello. I am trying to find out why my ute pulls to the right when I brake. It is not very noticable with lite braking but gets worse with more brake pressure. I have changed the wheel bearings, calipers and disc pads. I have also had a wheel alignment but still no luck and thus need ideas. Could it be the wheel bearing or the disc width?
Logged
Paul In Ireland
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1059



View Profile
« Reply #1 on: November 13, 2008, 01:05:11 AM »
0

You mentioned wheel alignment - did you get the tyres balanced as well? Is there any wear one one side of the tyres or other?
Logged

The International FE FC Fleet of Ireland
Education is where you read the fine print. Experience is what you get when you don't.
Just40
qld-club
Senior Member
****
Offline Offline

Posts: 373


I cant fix my brakes, so I made my horn LOUDER


just40fe
View Profile
« Reply #2 on: November 13, 2008, 05:02:19 AM »
0

do you have even pressure in the left hand side flex line, how old are the flex lines.
Logged

FC427
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 2457


I love YaBB 1G - SP1!


View Profile
« Reply #3 on: November 13, 2008, 09:05:35 AM »
0

 Also did you reco the calipers or just change them HuhHuh......FC427.......
Logged

As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
perth_fe_ute
Junior Member
**
Offline Offline

Posts: 30


View Profile
« Reply #4 on: November 14, 2008, 05:57:41 PM »
0

The calipers are like brand new, brake shop did well. The brake lines are new also. I have been thinking either bleeding or camber from another post. Will bleed the brakes again this weekend and see if there is any improvement. Its alwasy good fun trying to get a car ready for a police inpection.... Huh
Logged
waynos
Senior Member
****
Offline Offline

Model: FC
Posts: 787

patience grasshopper


View Profile
« Reply #5 on: November 25, 2008, 08:10:57 PM »
0

when you say new brake lines is that the rubber lines or both?
definately could be air in line ,more chance of air cause it s so much longer than the right,
did you spend the same amount of time bleeding on both sides?
Logged

The grinder is mightier than the sword.
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #6 on: November 25, 2008, 08:35:16 PM »
0

Have you checked the rear brakes? The car will still pull one way or the other other if the rear is dragging

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.042 seconds with 20 queries.