Stromberg Jets

[Rod]

Hi All,

I am after 2 48 stromberg main jets. I tried a while ago with American Auto parts but they don't stock them anymore.

If anyone has got any spares or knows a location where I maybe able to purchase them I would be interested in hearing from you.

I have some main jet drills but unsure of their size, so worst comes to worst I can get some blank ones and drill them out.

Cheers

Rod

[craiga]

Try Carb Service Company, they are on Parramatta Road Burwood, next to the bus depot.

Cheers,

Craig

[colt]

You can always solder yours up & redrill them.
Colin

[Rod]

Thanks Guys for the reply. Yes I may solder jets up and redrill but I am hoping this is the last resort. I understand because of the small nature of the bits slow revs is needed with the drill. Don't know if I want to risk breaking the bit.

Once again thanks.


Rod

[peterwmh]

Was this the jet size in the original 1 1/32 stromberg?  If so I have a carby here that I can pinch the jet out of!!  Only problem is I can't find my main jet removal tool!!  

Peter

[customFC]

I think originals are 51.
Did Carb Service co have what you needed?
Regards
Alex

[cruiser056]

Rod,
       I think I have some, back from when I was running tripples and playing around with lots of different types of jets.  I will have to check in the shed tonight, I will send a pm with what I have.

Michael

[cruiser056]

Rod,
        I checked my shed and all I have are 3 x 45, 1 x 50 and 1 x 59.  Sorry no 48's, I think that is what I ended up using in the tripples.

Michael