Besides if I'm going to cut I might as well put in an aussie 4 speed. I have 2. Will that bolt up to the red bell housing or do I have to change that as well and wot support will it need under the floor ? I understand whats been said previously but I'm a "MONKEY SEE MONKEY DO" kinda guy. I need pictures, lots of pictures. Cheers
Mark,
I have posted a link to the floor modifications commonly used in this type of conversion. An ideal is to get hold of an EK Auto tunnel and weld it into the floor. You can opt for a factory one if you can find one or an aftermarket one will do the job as well. Have a look at the photos, it will become evident as to what is required. The underneath of Ken's car has a trimatic fitted and this requires the same type of mounts that will be required to fit the Aussie 4 speed
http://fefcholden.org.au/forum/index.php/topic,14706.0.htmlKeith
