FE-FC Holden Discussion Forum
November 01, 2024, 10:36:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Roof Gutter Stainless Strips  (Read 2805 times)
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Online Online

Model: FE and FC
Posts: 5134


Willaston, South Australia


Glenn.Stankevicius
View Profile
« on: February 24, 2003, 12:01:18 PM »
0

Can anyone offer any advice on removing the stainless trim from the roof gutters, I want to polish it and put it back when the car is painted, so a non-destructive method is prefered.

Thanks.
« Last Edit: February 24, 2003, 12:02:54 PM by stinky » Logged

zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1863


Old Boonah Ambo


View Profile
« Reply #1 on: February 24, 2003, 12:38:20 PM »
0

Hi Stinky, From memory when I did my FE I was advised to use a stubby straight edge screwdriver & hammer, working very slowly & carefully, starting at the front.

Once you get it started you only have to tap it here & there, be extra careful at the corners & in the middle.

Good luck! Regards Gary. Wink
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #2 on: February 25, 2003, 08:30:21 AM »
0

Gary is correct, the idea is to try not to let the screw driver go under the strip but just push the edge of the strip away.
The other idea is to stop the stripe from bending as much as possible hence tapping lightly and along a 6 inch length at a time.

Ken
Logged
2brite
wa-club
Senior Member
****
Offline Offline

Posts: 290


Cruizin's devine in a '59


View Profile
« Reply #3 on: March 14, 2003, 12:15:33 PM »
0

Here's my 3 cents worth,if the trim aint all that bad and it just needs a polish and your scared of damaging it  whilst trying to get it off  try masking off the roof and door areas and hitting the trim with a mini buffer,
Like i said it's only 3 cents worth
Regards 2brite
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.039 seconds with 22 queries.