FE-FC Holden Discussion Forum
March 29, 2024, 09:47:26 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
  Home Help Search Calendar Login Register  
  Show Posts
Pages: 1 [2] 3 4 ... 90
21  Galleries / Project Cars - FEs and FCs Under Construction / Re: Ruby - my FC Ute on: May 02, 2020, 01:47:37 PM
You can buy the door jam switches new and run and a positive wire to the switch. The screws earth it.
22  Galleries / Project Cars - FEs and FCs Under Construction / Re: Art's FC Sedan Build 2.0 on: March 22, 2020, 07:01:03 AM
How easy was it to fit the pedal assembly! 😊
What I needed to do with the cab was to cut some of the original and bolt it up to where it goes on the dash and weld the 2 together.
On the front of the booster I also needed to make a support bracket to the subframe to stop flex when the pressure was applied to the brakes.
Good work mate!
23  General / 2020 - Wangaratta - 18th FE-FC Holden Nationals / Are the nationals going ahead? on: March 14, 2020, 04:22:40 PM
Just wondering with all of the new government restrictions is the Nations still going ahead?
24  General / General Board / Re: Where have all the images of fe panelvans gone on: March 13, 2020, 01:55:57 PM
Before photo was at Mareeba North Queensland.

The new van at present we are thinking EV over a 10 year build. So will wait for better tech. I have collected all of the bit for the shell, and will wait until I move back to Aus yo start them with my son.
I have a wagon with same time frame that I will most likely slot an LS3 into.

25  General / General Board / Re: Where have all the images of fe panelvans gone on: March 12, 2020, 07:39:14 AM


Its an FE as well.



26  General / General Board / Re: Where have all the images of fe panelvans gone on: March 12, 2020, 07:25:44 AM







Before and after. The van got some use too, the dogs loved it!
Sold it to Glenn and he won't sell it back so have to do another one.
27  General / General Board / Re: Where have all the images of fe panelvans gone on: March 10, 2020, 04:24:57 PM


28  Technical Board / Restoration Help / Re: Sub frame rust repairs on: August 03, 2019, 07:57:43 PM
I think it all depends on how far the rust has progressed mate.
If you start and find more then it comes out anyway. Everything in also makes it harder to paint.
29  Galleries / Project Cars - FEs and FCs Under Construction / Re: Art's FC Sedan Build 2.0 on: June 30, 2019, 05:08:40 PM
Fantastic that it is ticking along nicely mate! Great to see some pics too.
30  Galleries / Project Cars - FEs and FCs Under Construction / Re: Art's FC Sedan Build 2.0 on: June 29, 2019, 06:05:12 PM
Where you up to Art?
31  Technical Board / General Technical / Re: Air Con/Heat/Demist on: May 09, 2019, 04:40:32 AM
The top one is in the Ute mate
32  For Sale and Wanted / Parts For Sale / Re: Radiator support panel plus ZINC plated on: May 08, 2019, 10:11:37 AM
Will take these too mate. Don’t need the battery tray though.
33  Galleries / Members' FEs and FCs / Re: My new FC.... on: May 04, 2019, 12:35:01 PM
We can fix the power rack lol
34  For Sale and Wanted / Parts For Sale / Re: L + R quarter vent windows...exc on: April 28, 2019, 06:16:52 PM
Message sent mate.
35  For Sale and Wanted / Parts For Sale / Re: L + R quarter vent windows...exc on: April 27, 2019, 08:10:32 PM
Still for sale mate?
If so I will grab them.
Cheers
JB
36  Galleries / Project Cars - FEs and FCs Under Construction / Re: my wagon on: February 26, 2019, 04:10:02 PM
I made the rotisserie from 2 engine stands and scrap steel lol. Not too hard to do.
There are a few of us now with V6 conversion from ends, and once you have changed the shocks and then put the correctly rated springs in for the weight they are on.
There is nothing on them that resembles a steering stop though and not sure how to fabricate it.
I moved the engine back in the frame so had to make a new sump from 2 as you saw.
Main benefit is the VT wheel hubs and brakes bolts straight on. I would recommend the booster and pedal assembly also. Done this twice now for a good result.
37  Galleries / Project Cars - FEs and FCs Under Construction / Re: my wagon on: February 26, 2019, 02:46:16 PM
Hi Corey,

Here is my complete v8 conversion that you may be interested in reading to help you.

Cheers
JB

365 weeks...
38  Technical Board / Modification Help / Re: Engineer on: January 07, 2019, 09:17:58 AM
Try Livingstone automotive... Lindsay is based in Townsville, but travels quite often south.
He will be able to guide you.

Cheers
JB
39  For Sale and Wanted / Cars For Sale / Re: Modified Fc Ute WA on: December 27, 2018, 05:02:55 PM
Prob help with a price guide mate, otherwise will only get local interest.
Cheers.
40  Galleries / Project Cars - FEs and FCs Under Construction / Re: Heart Transplant - adding 172ci on: October 30, 2018, 12:12:48 PM
C’mon NES are you ignoring all of us??
Pages: 1 [2] 3 4 ... 90
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.032 seconds with 19 queries.