FE-FC Holden Discussion Forum
March 29, 2024, 07:47:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
  Home Help Search Calendar Login Register  
  Show Posts
Pages: [1] 2 3 ... 6
1  For Sale and Wanted / Reproduction Parts / Re: Rares Floor Pans. on: April 08, 2016, 01:41:21 PM
We have ADR rules in place for what our cars should be built and fitted with,and I think,imo,Rares have missed the mark with their 'tin can' floor pans,i assume these are made in China for 50cents and sold here for $70,moneys not the issue here,it's the product,i hope they fix this problem as there's lots of unhappy guys out there! Smiley Angry

You should never assume, these pans are made by Rare Spares in Australia using BlueScope steel (BHP) they are 1mm thickness the same as original , they have been made from this material for many years
Les
2  For Sale and Wanted / Reproduction Parts / Re: FC Special Badge on: June 02, 2015, 10:11:45 AM
Hi RET
No problem if I can answer questions I will try too, obviously there will be  some  cannot answer.
Regards
Les
3  For Sale and Wanted / Reproduction Parts / Re: FC Special Badge on: June 01, 2015, 08:34:52 PM
It is a combination of things that come together, feedback, our wish list, expert advice, advice from car clubs , forums, our manufacturing capabilities, model fitment and most importantly what’s left in in the manufacturing budget.
The next diecast part we make will not fit FE FC at all it will be a HQ part. The tail lamp rim is the next FE FC diecast part to be made and yes I would love to make the Headlamp rim and if possible we will eventually make them.
The reasons for making the tail rim it fits 4 models (a small reason) the most important reason is that we do not have the capability to make the FE FC headlamp rim at the moment but we will eventually be able too, I would say before the Station Wagon badge.
There are other things that come into play but this is a brief description of how decide to make parts I hope it answers your question.
Les
4  For Sale and Wanted / Reproduction Parts / Re: FC Special Badge on: June 01, 2015, 05:20:28 PM
The wagon badges are possible but we are unsure of the sales , we may look at tail lamp rims next.
Les
5  For Sale and Wanted / Reproduction Parts / Re: FC Special Badge on: May 30, 2015, 07:44:47 PM
They will be about $95.00
6  For Sale and Wanted / Reproduction Parts / FC Special Badge on: May 29, 2015, 11:33:57 AM
https://www.facebook.com/rarespares/photos/a.96487499419.84090.90122099419/10153251894854420/?type=1&theater
7  Technical Board / General Technical / Re: Front spring shims on: May 24, 2014, 09:18:33 AM
Thanks Stewy
8  Technical Board / General Technical / Front spring shims on: May 23, 2014, 06:48:57 PM
Can anyone tell me how many shims are use on the front springs of an FE FC
Les
9  For Sale and Wanted / Reproduction Parts / Re: Master CylinderReservoirs on: May 12, 2014, 06:52:17 PM
Rare spares has looked at making the reservoirs , But we would prefer to make the complete master cylinder the original type
Les
10  Technical Board / Restoration Help / Re: Clip, letters: HOLDEN on: May 11, 2014, 06:26:09 PM
Try These
http://www.rarespares.net.au/rarespares/ProductPage.aspx?product=NS0044
11  For Sale and Wanted / Parts Wanted / wiper baldes & wiper arm on: December 10, 2013, 08:13:04 PM
Can anyone help with a pair of original wiper blades and wiper arms for an FC
Les
12  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: October 23, 2013, 07:45:58 PM
The sill panels have arrived the will be they will be in stock next week
13  General / General Board / Re: FE FC Repro lenses on: August 28, 2013, 07:42:05 PM
There are lenses on the market made from urethane which are brittle and fade, if you are buying lenses make sure they are plastic. The ones from American Auto Parts are Plastic
14  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 27, 2013, 11:11:35 AM
I have just been informed that the price I quoted for these sills was incorrect they will be $247.50 each sorry about the mistake
15  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 12, 2013, 07:10:17 PM
Hope it doesnt de value my NOS sets i have  Grin

Good Job.
If they are painted black it would be hard to tell the difference.
16  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 12, 2013, 11:33:30 AM
When we first made these sill panels they were a fairly good fit maybe not quite as good as genuine but then again we did not have the luxury of being able to amortise the cost over 4 (FE – EK) model runs but they did fit and were the only ones on the market with pressed ends. When the tooling showed signs of wear and we tried to repair it. That is when they became a lot lesser quality and we removed them from the market some three years ago. So from our point of view they are in the past and let’s move on with these new ones. The main concern appears to be are they the same thickness as the original well no they are not, the originals were in imperial and the new ones are in metric gauge material and are marginally thicker although you would not notice.
Les
17  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 11, 2013, 05:54:28 PM
They look very good, so much better than the current Rare Spares effort. I hope they are made from a thicker gauge metal than the current panels as well.
We do not make any at the moment and have not for 3 years so I am at a lose to know what you mean by our current sill panel .
18  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 09, 2013, 01:32:38 PM


Here is a picture.

Les
19  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 07, 2013, 09:26:58 PM
Craig Vanes, are dead straight with no ends, need to form a bend to follow the curve in the car.

Sounds like the ones Les is talking about are a new Rares model.

Is this correct Les?

Yes they are new with the ends and curve
20  For Sale and Wanted / Reproduction Parts / Re: FE - EK SILL PANELS on: August 07, 2013, 07:20:41 PM
Hi Les,
Do you have any pictures of the test install on Mike Fiddes car?

Trevor_B

This is a later test
Pages: [1] 2 3 ... 6
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.031 seconds with 17 queries.