 Show Posts
|
|
Pages: [1] 2 3 ... 15
|
|
3
|
Technical Board / General Technical / Wiring a towbar
|
on: July 09, 2021, 03:12:14 PM
|
|
Gday all. I know this has been asked before, but I am a bit dumb. As I want to leave my FE rear lights original, I am wanting to wire my towbar by running new wires from under the dash back to the socket. I have a 5 core trailer wire. I have a coloured wiring diagram which I have been studying and am a bit confused as to where they all get connected. Do I connect the indicator wires to the purple and pink wires coming out of the steering column. ? Do I connect the park light wire to the white wire from the light switch. Do I connect the brake light wire to the stop lamp switch outlet before the junction of the purple and pink wires, but wouldn't that still pick up the intermittent indicator signal? As I said I am a bit dumb with these things, (and lots of others). Any clues. thanks in anticipation, Mike.
|
|
|
|
|
5
|
Technical Board / General Technical / Re: Reinstalling the bonnet emblem
|
on: May 24, 2021, 03:18:38 PM
|
|
Thanks Laszlo. I think you must mean 15cm for the front bolt.?? I thought from memory of the ones that were lost by the platers it was about 4 inches - 10cm long, to go through the panel in front of the bonnet catch spring/bolt. I have bought some stainless 1/4inch bolts but still working on marking out where to drill the holes. I have the plan from on here, just measuring a few times before taking the plunge and drilling. cheers, Mike.
|
|
|
|
|
8
|
Technical Board / Restoration Help / Re: Hood liner
|
on: June 07, 2017, 09:07:25 AM
|
|
Gday Ray... Rob at Trimtastic in Toowoomba made and fitted mine. He is not expensive and may be worth a shot. I think his work is very good and he is a good bloke. cheers Mike.
|
|
|
|
|
13
|
Technical Board / General Technical / Re: Fuel Pump Service Kit for 6 cyl red motor
|
on: February 18, 2016, 09:18:17 AM
|
|
Keith, I bought one of his grey motor kits for my vacuum pump but the rubber seal that goes on the diaphragm shaft is the wrong size. The local guy at Express Engineering in Toowoomba has some NOS Goss kits for grey motors. Had to buy another full kit off him to get the right seal. Mike
|
|
|
|
|
18
|
Galleries / Members' FEs and FCs / Re: My Std FE wagon
|
on: May 05, 2015, 10:06:40 AM
|
|
Hi Cam...as I said to you on FB, saw your car at David Hack Day....It is as good in the flesh as in the pics.. Hope you are bringing it to the Nats next year.. cheers, Mike.
|
|
|
|
|
