Price Drop - Now $4000.000

M@

DAMN first one now removed!

M@

Wanted to sell a BRAND NEW Pat Gardner V6 Conversions new styled front end to fit small block Chev to early Holden - bought this and have canned project - lots of bits to come!

Coil Over AVO Pro racing shocks
Tubular arms
suits standard original sumps
FULL VSB14 approval
this is the later version with fitted sway bar!

Also included is the correct Power Steering rack (could be Ok as it is or use for reco or exchange), modified rack ends, brand new tie rods and intermediate shaft and reaplaced all the suspension load bearing Nyloc bolts used with Genuine GM Cone Lock nuts and boltys to keep engineer happy, VS Commodore Stubs - just fit new bearings and brakes and away you go!

More info here:

http://www.v6conversions.com.au/NEW%20FRONT%20END.HTM

http://www.bremarauto.com/portfolio/vsb14-suspension-assessment/

http://www.v6conversions.com.au/CO0036%20-%20V6%20Conversions%20FX-HR%20Front%20End%20800kg.004.pdf


Can deliver in Vic or elsewhere with some notice (and fuel money lol)

This thing cost over $5500 delivered - plus the additional parts on top of that (rack / rack ends / tie rods / Stubs etc etc etc)
Selling for $4500 ono


M@

Wanted running grey motor - as complete as possible

Victoria but can can travel for decent motor

Matt

  Fingers Toes and all else comfortably possible - Crossed!   

Cal and check if it is still for sale, I am pretty sure a recent post on Oldholden said the new owner was getting it transported after Christmas!

M@

Hi Ken,

found this FC Ute sitting in a paddock and thought to grab the ID numbers for you............................
It was so rusted that when it was pushed into place it snapped in half!

FC2106-1753M
355-648
253-7773

Chassis
8-12187-M

No Motor

Hi all!

Looking for a set of "LENLOCK" 20 door pull to handles for a project

same as these ones,

http://www.ebay.com.au/itm/370687621699?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_509wt_1200

a full set would be great, but will take any odd loose ones anyone has laying around

Thanks
Matt

Hi All!

Just wondering if anyone has any of the stainless door trim pieces off the top of an FE special? do not have to be in great condition  but serviceable would be great!

Cheers
Matt

The number plates belong (or used to) to Streetneat, and seeing that this isn't "Miss Lead" his FC coupe,
I would dare to go as far to suggesting it is a very good Photoshop

What are a full set of ute tray strips worth these days??

M@

Pretty sure QL was red from HQ to HZ series - but don't quote me

Matt

Crowbar, one of the reasons they give you angles rather than actual heights from set vehicular points, is the various seating that you MAY have, buckets bench etc - each one will have a different "angle"  in relation to height of the mounting point when fitted.

if you have worked out your final seating - then it may make it a little easier to find that elusive "spot"

M@

Fairly common for Steve to advertise cars that "are not really for sale" at prices that will raise "interest" in the cheaper ones (25 - 30K) he has at upcoming auctions etc.

Once a salesman always a salesman

BUT

Of course he says it is all in the interest of bringing new members to the NSW FB EK Car Clubs, so good on him for being so selfless!

M@

You might be thinking of Roger Hancock, or holdenmanrestomotive. He is located in Ferntree Gully in Victoria and really knows his stuff.

Had one Steering box rebuilt about a year ago and he does a top quality job on the box, and with the rollers in it lightens the steering just a little (or feels like it anyway), brilliant to deal with and will ship it back and forth if needed.

or email him on:
holdenmanrestomotive  AT  gmail  DOT  com  Dot  au

have also PM'd his mobile number if you want to have a chat with him.

M@

Paul Kelly = Croozin Skirts = fantastic product and great guy!
I think from memory he shut down the shop recently - pretty sure I still have his number somewhere, will try to ring him and see if he is still making them? or as suggested above try FB EK forum he does post over there (infrequently - he seems to get hammered for his opinions for some reason)

M@

Thanks for that Ret, I have emailed them and asked if they could investigate for me and possibly re-instate the info on the site for all to enjoy

Matt

Hi Guys, not sure who posted the original link on the Tech articles page - but there was an informative article on how to re calibrate your speedo, the link now does not work and simply says Geocities is closed or some such message. Anyone have the article, information or new link???

Cheers
Matt

Rogers kits are 110% fantastic! I have used two of them in different cars and both were spot on. There are quite a few people on the forum that have used them and (from memory) none of them had issues fitting them either. Just a simple easy to install kit that comes with just about everything you need. Roger is always happy to help with info or assistance is you do happen to run into any problems as well.

M!
P.S. not affiliated in any way just a very happy customer!

I have been running my Grey / Trimatic combo for years and just used the original Stally from the donor car,

Omalley have never heard of the need to change stally, might have to look into that if ever mine plays up

Will definitely need to change diff ratio though the 3:89 will be shocking! I am running a 3:36 and it is heaven! but 3:55 is also highly recommended - depending on wheel tyre combo

Matt