....and location, Central Coast NSW
- Welcome to FE-FC Holden Discussion Forum.
News:
Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Parts For Sale / Re: Expressions of Interest
January 12, 2022, 07:18:46 PM
Hi There,
Face to face with 20mm per side spacers 1480mm (without spacers 1440mm)
Spacer locates on axle hub this also extends the hub for the wheel to locate on and has extra long studs.
Forgot to mention diff has Whiteline sway bar, with proper diff mounts, there is also a tail shaft to suit diff flange and Aussie 4 speed.
Cheers
Steve
Face to face with 20mm per side spacers 1480mm (without spacers 1440mm)
Spacer locates on axle hub this also extends the hub for the wheel to locate on and has extra long studs.
Forgot to mention diff has Whiteline sway bar, with proper diff mounts, there is also a tail shaft to suit diff flange and Aussie 4 speed.
Cheers
Steve
#3
Parts For Sale / Expressions of Interest
January 12, 2022, 12:28:34 PM
Hi Guys,
I have a converted VL Disc Brake Diff suit FE-FC I'm wishing to sell.
3.45 LSD.
Billet Axles.
Commodore bolt pattern, enough meat to be re-indexed.
Drilled slotted discs.
Proper wheel spacers to accommodate commodore wheel offset (with longer studs)
EK van leaf springs.
Not sure of the asking price so I thought I'd seek expressions of interest first.
If you interested please send a message
Cheers
Steve
I have a converted VL Disc Brake Diff suit FE-FC I'm wishing to sell.
3.45 LSD.
Billet Axles.
Commodore bolt pattern, enough meat to be re-indexed.
Drilled slotted discs.
Proper wheel spacers to accommodate commodore wheel offset (with longer studs)
EK van leaf springs.
Not sure of the asking price so I thought I'd seek expressions of interest first.
If you interested please send a message
Cheers
Steve
#4
Modification Help / Re: Outer EK Wiper Arms
May 17, 2020, 05:01:38 PM
Thanks for the reply Errol, Ill run with the latter and keep what I have grabbing some new inserts.
Cheers
Steve
Cheers
Steve
#5
Modification Help / Outer EK Wiper Arms
May 16, 2020, 06:11:55 PM
Hi Guys,
Couple of Wiper Arm Questions
Will EK Outer wiper arms and blades fit on my FC (straight swap)? If this is possible it will make it easier to purchase new blades.
I understand there are 2 types of EK outer Wiper Arms Vacuum and Electric, if they fit which ones do I get (and whats the difference)?
Also what wiper blades do you guys buy when fitting new blades to original FC Wiper Arms? I cant seem to find them listed anywhere.
Thank you in advance.
Cheers
Steve
Couple of Wiper Arm Questions
Will EK Outer wiper arms and blades fit on my FC (straight swap)? If this is possible it will make it easier to purchase new blades.
I understand there are 2 types of EK outer Wiper Arms Vacuum and Electric, if they fit which ones do I get (and whats the difference)?
Also what wiper blades do you guys buy when fitting new blades to original FC Wiper Arms? I cant seem to find them listed anywhere.
Thank you in advance.
Cheers
Steve
#6
Parts Wanted / Re: FC Ute trim/lining retainer strip
October 16, 2017, 05:23:29 PM
Link to image of my passenger side strip.
Looking for drivers side or both if you are only willing to part with both.
http://www.fasttech.com.au/ute/images/strip.png
Cheers
Steve
Looking for drivers side or both if you are only willing to part with both.
http://www.fasttech.com.au/ute/images/strip.png
Cheers
Steve
#7
Parts Wanted / FC Ute trim/lining retainer strip
October 16, 2017, 10:58:52 AM
Hi Guys,
Looking for a drivers side trim/lining and wind lace retaining strip that screws on just inside of the cab in an FC Ute (maybe van as well, not sure). I dont know what it is called, it has the same finger arrangement that you tap down to retain the hood lining, the trim goes over and tucks in behind, you then tap the trim for it to be retained. I have a photo of the passenger side one I have if you need clarification of what Im looking for.
Cheers
Steve
Looking for a drivers side trim/lining and wind lace retaining strip that screws on just inside of the cab in an FC Ute (maybe van as well, not sure). I dont know what it is called, it has the same finger arrangement that you tap down to retain the hood lining, the trim goes over and tucks in behind, you then tap the trim for it to be retained. I have a photo of the passenger side one I have if you need clarification of what Im looking for.
Cheers
Steve
Pages1