Some photos and video hopefully
Sent from my SM-G920I using Tapatalk
Sent from my SM-G920I using Tapatalk
- Welcome to FE-FC Holden Discussion Forum.
News:
Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Project Cars - FEs and FCs Under Construction / Re: Re:
March 03, 2016, 12:49:35 PMQuote from: My58V8FC on March 03, 2016, 12:45:58 PM
Up and running first time
Sent from my SM-G920I using Tapatalk
Trying to upload video no luck
Sent from my SM-G920I using Tapatalk
#3
Project Cars - FEs and FCs Under Construction / Re:
March 03, 2016, 12:45:58 PM
Up and running first time
Sent from my SM-G920I using Tapatalk
Sent from my SM-G920I using Tapatalk
#4
Project Cars - FEs and FCs Under Construction / Re:more progress
January 12, 2016, 06:40:08 PM
Custom extractors and exhaust fitted and test fire up.[/img]]
#5
Project Cars - FEs and FCs Under Construction / Re:
September 07, 2015, 05:17:25 PM
More progress final fitting of motor and start o the wiring
Sent from my SM-T805Y using Tapatalk
Sent from my SM-T805Y using Tapatalk
#7
Project Cars - FEs and FCs Under Construction / Re: My Fc Project
June 25, 2015, 09:03:36 AM
Some more photos on the wheels and rolling
Sent from my SM-T805Y using Tapatalk
Sent from my SM-T805Y using Tapatalk
#8
Project Cars - FEs and FCs Under Construction / Re: Re: My Fc Project
June 20, 2015, 05:24:19 PMQuote from: My58V8FC on June 19, 2015, 10:01:34 PM
Have had some progress on my project
Got the ride height right by adding 38mm lowering blocks
Test fitted 18x8 rims and 35 series tyres. Need to order new rims with 10mm more offset inward to clear the guard
Wiper motor from VS fitted and new arm made with 25mm offset to clear firewall.
Arms fitted and tested all working and clearance with arms crossover. Need to set.
Going old school on the intake with elderbroke 1350cfm throttle body.
will try and upload some updated photo's with progress
Quote from: NES304 on March 25, 2015, 08:29:07 PM
Sent from my SM-T805Y using Tapatalk
#9
Project Cars - FEs and FCs Under Construction / Re: My Fc Project
June 19, 2015, 10:01:34 PM
Have had some progress on my project
Got the ride height right by adding 38mm lowering blocks
Test fitted 18x8 rims and 35 series tyres. Need to order new rims with 10mm more offset inward to clear the guard
Wiper motor from VS fitted and new arm made with 25mm offset to clear firewall.
Arms fitted and tested all working and clearance with arms crossover. Need to set.
Going old school on the intake with elderbroke 1350cfm throttle body.
will try and upload some updated photo's with progress
Got the ride height right by adding 38mm lowering blocks
Test fitted 18x8 rims and 35 series tyres. Need to order new rims with 10mm more offset inward to clear the guard
Wiper motor from VS fitted and new arm made with 25mm offset to clear firewall.
Arms fitted and tested all working and clearance with arms crossover. Need to set.
Going old school on the intake with elderbroke 1350cfm throttle body.
will try and upload some updated photo's with progress
#10
Project Cars - FEs and FCs Under Construction / Re: My Fc Project
June 06, 2015, 08:16:47 PMQuote from: NES304 on March 25, 2015, 08:23:54 PM
Grand-daughter helping out with strip down
#11
Project Cars - FEs and FCs Under Construction / Re: My Fc Project
March 26, 2015, 07:32:19 PM
Yes its a great shed, 300 sq mtrs, with 8ft lathe and milling machine, 3 tonne 2 post Car hoist c/w3phase power
I had to wait 20 years to find and to convince the better half about buying this place.
Makes life a lot easier, not getting any younger so time to spoil myself with some comfort
I had to wait 20 years to find and to convince the better half about buying this place.
Makes life a lot easier, not getting any younger so time to spoil myself with some comfort
#12
Project Cars - FEs and FCs Under Construction / Re: My Fc Project
March 25, 2015, 03:45:32 PM
The 304 is out of a VQ Statesman
Also have a 304 from a VS Statesman deciding which one to use
Just picked up the VS Statesman for $800.00 complete another donor car
Also have a 304 from a VS Statesman deciding which one to use
Just picked up the VS Statesman for $800.00 complete another donor car
#13
Project Cars - FEs and FCs Under Construction / My Fc Project
March 24, 2015, 03:56:52 PM
I have been reading this forum for several years now and have decided to join in
I am currently in the process of building a FC Special sedan
Running 304 Injected, Auto Air and power VS Rack & Pinon Steering, Cruise Control
Commodore Diff and VX Brakes all round.
V6 Conversion front end
I will post some photos once I have worked out how to
Current work has been passed by my Engineer so it will be full rego in Qld ;D
Any hints on posting photos ????
I am currently in the process of building a FC Special sedan
Running 304 Injected, Auto Air and power VS Rack & Pinon Steering, Cruise Control
Commodore Diff and VX Brakes all round.
V6 Conversion front end
I will post some photos once I have worked out how to
Current work has been passed by my Engineer so it will be full rego in Qld ;D
Any hints on posting photos ????
Pages1