Messages

Had  a customer come in to show me his new aquisition being an  early 56 special which has a four piece rear screen mould,
not having encounterd  one before i was intrgued by it. He does require one joiner clip if one is available, they seem to be narrower than general ones.
any help would be appreciated.
                                     Phil.

hi Blacky, have got one of those "spare".
will send PM. philwreck.

 Hi  Jolls, can help with a R/H arm rest base  it has some covering  but top is "melted away"
             If Glenn is sorting parts out  i can drop at his place and perhaps send together.
             
              Phil.

Sorry to hi-jack the thread.
Errol could you please contact me re:rear tank section.
Philwreck.   0416081109.

Sent you a pm.

G'day Glenn.
have got springs, one large one small good condition. Also have a pair that could do with some attention.
these are out and ready.  Phil.
                                 

G;Day Glenn you can always slip up and look at some of my old wrecks .
   phil.. ;D

something you may want to "check" while box is out is clutch fork around pivot area on ball, may have a crack in it.

Great song written by Troy Casser-Daly and sung by Barnsie. 
Brings a tear to your eye when you see images of Holdens at Elizabeth and Fishermans Bend and what we have lost.

https://youtu.be/LcoQyzitZjk

HI Gary
you might look at using panel glue just for that small section , have used it with good results.

  phil.

 hi glen, I think you should pay me a visit.do have a rough template and one in my sedan.
             phil

on its way sent Friday afternoon aus/post.
          phil.

Hi Dave,yes I can help with a "ring". PM me with your address and work out postage,etc.
       phil.

p.m. sent   phil.

just to let you know that we appreciate all your legwork and taking this project "by the horns"and following through,with your own funding etc.im sure the sentiments of all purchasers would be the same.looking forward to the end product.Great stuff ...phil.

Well done Glen!  It's a lot of hard work and many will benefit from your efforts.
phil

Took your advice to book early and rang today.
Members should be aware that the prices quoted on the web site are for 2016.
Prices for 2018 vary upward between $26 and $58 per night depending on what accommodation you choose.
Start saving!
Phil

Hi pete, do have an axle here (in gawler s.a.) you would be welcome to it ,but freight is the question.if you cant source one there  locally we will have to work it out...phil.

If you make your way to Gawler or organise courier you would be welcome to have the brackets.  Keeping in mind I will be leaving sat afternoon for  Nats ,but will be there in the morning.cheers phil

Not long to go now, we are leaving on the 19th for a leisurely drive to Toowoomba.

A local artist has added a FC Ute to his collection, we are planning to bring over some prints for anyone who is interested.

There are four options:
297mm X 210mm (A4) in colour (as shown in photo) or black and white for $20
or
420mm X 297mm in colour or black and white for $35

they are printed on 3mm PVC board.

if you think you would like one let us know so we have a bit of an idea how many to bring.

thanks
phil and elaine