Messages

thanks gaz...seeya friday

hi,looking for a good bonnet emblem for an fc ,the nasco accessory one .(.looks like a bird or aeroplane)...cheers mike..melbourne

Thanks Ken ...much appreciated..Mike

Hi,hoping someone can help...am running a reco grey 149? all standard with 205/60/13 mags and it's reving hard on highway use and drinking the fuel !!!any ideas on diff ratio and would anyone have one for sale in the melbourne area..many thanks Mike

Hi,i'm after a contact in melbourne who might be able to on the  original rims , widen to a 6 inch with a dished look...any help would be great ...Mike

thanks ...much apprciated

hi,just wondering if someone can inform me of i have a 59 fc that is registered in victoria with no seatbelts..i was going  to install 5 seatbelts from either hemco or klippan for the kids and myself and i've heard you need to get a engineers certificate ...is this true ?  and why...?       ..Whats the best way to tackle this...cheers mike

hi guys,just after some thoughts on fitting seatbelts to my fc sedan,i need to put 3 in the back for the kids..thinking lap sash from hemco???and for the 2 front thinking 3 point harness ,as i'm not a fan of the pillar bolt...or should i be...has anyone else fitted harnesses and are happy ??? anyhow thanks for any feedback...cheers mike

thanks ken....also can i give you my vehicle details for your collection..mike

thanks mike,much appreciated

hi guys,just trying to install a boot seal and are having problems knowing which way this rubber seal goes...tip of the rubber facing into the boot or facing outside...cheers mike

hi,was just wondering if someone might know if eh-hr ,torana 7 inch mags would fit on a standard fc and also not rub...cheers MIKE

hi,just wondering if anyone had a wiper knob available,,,cheers Mike

thankyou....much appreciated...mike

hi,i was wondering if anyone could help me with my trim code.I typed in the trim code 313-841 into the id checker however the result came back two tone..india ivory over royal marine which is correct but the interior trim came back unknown ??thanks Mike

hi,was hoping someone might know a good dearbox oil, make and  brand for a 3 speed crash box for an fc...cheers mike

hi,was hoping someone might know where to get uni joints for an fc in melbourne for a reasonable price...cheers mike

hi,was just hoping if anyone could help me with my new clutch install.My question is which way does the clutch plate go,hub to flywheel or hub to pressure plate,there is no indication printed on the plate and the manual says to flywheel,however the local transmission mechanic says to the pressure plate...thanks for reading mike

hi,just hoping if someone could help me locate a good cluster gear or good 2nd hand gearbox for an fc 3 speed...cheers mike

hi,i am chasing a fuel gauge for an fc,with good lettering if possible,and af anyone has any info on why some gauges have fuel printed on them and some do not?..thanks mike