Messages

Hi Rob
Thanks for your reply’s  on this subject.

Regards
John

Hi Rob
The measurement of the oil pump shaft that I removed from the failed FJ engine measures 14.15.

The spare oil pump shaft I have measures 14.20
Sitting them side by side they look identical.

The main pump body of the pump removed from the damaged FJ engine has a part number 7409385

I do have another pump body it has a different part number 7400883. My spare oil pump shaft doesn’t fit this body or the damaged FJ  engine pump body.

I did notice that the pump out of the damaged engine when you look down from the top
Where the two pump gears sit at the bottom, the one out of the FJ damaged engine is
pretty flat with the casting where the two gears sit.

The spare pump body 7400883 I have that area is is raised.

Measuring from top of pump to bottom of where the gears sit
The damaged FJ engine pump part number 7409385 measures 25.51
The spare body part number 7400883 measures 25.17

This engine had a previous failure the tongue from the dizzy that drives the oil pump sheared off.
Also when I stripped the oil pump from the damaged FJ engine their was no gasket between the two half’s of the pump
as per the FJ manual.

Looking in the FJ manual the pump out of the damaged FJ  engine I am working on is as per the manual it has the same
Pressure relief valve set up as per the illustrations in the manual.

Appreciate  you help Rob.

Regards John

Hi
Can anyone assist with a good set of oil pump gears for grey motor in a FJ.
I have a gear set from a grey motor L block but the shaft diameter seems to be
Bigger.

Any help appreciated

Thanks
John

Hi Harv
Please proceed with my order for two head gaskets

Thank you
John R

Hi Harv
Can you put me down for two head gaskets please

Regards
John

Hi Everybody

John Pisani has asked me to let you all know that this weekend at Penrith Panthers Sydney the  Die Cast & Model Expo is on.

cheers
John

 

Posting for a freind

Geoff Sheather is looking for a right hand front guard for his FC it needs to be in reasonable condition

Please contact Geoff on one of the numbers below if you can help.

0408685176 or 02 6352 5033

thank you

John

Hi
I have sent you a PM re gearbox.

  John

Alana & I are at Perth airport heading home from the nationals and a small holiday.

We will be putting Tassi on the calander for sure.

We had a great time here catching up with everbody and seeing this lovely city.


Cheers
John & Alana

I have my copy down loaded as well great to be able to look at it on the pc.
Thanks

johnrap

Hello Hemi
Can you please send me a pic of the rocker cover. I am interested in it.
Also what state are you in.

Regards

John

hello wayne

Congratulations on the new arrival


regards

john

Parts required to finish FC Sedan for our up coming Nationals.
If any one has a good rear screen and a pair of rear quarter holden scripts
please contact me on 0412 586 074.

Thankyou

Regards
John :) :)

Hello
If any one has a pair of Bumper bar over riders in good condition they would like to sell please give send me a pm

Thanks in advance

:)

Regards

John

Hello Josh
If your still looking for a set of 48mm side draft dellorto carby on a manifold to suit red motor call Geoff 0408685176.

Regards
John

   

If any has a set of fc special door trims and arm rests laying around they want to let go  trim condition not important as I be re trimming them. they just need to be complete .

Can you pm me .

Thanks

John

 

Hey Paul
Nice looking wagon do you have any pictures of the engine bay is it still grey powered.

John

If anyone has  a set of  7" wide , 13'' steel rims to suit FC they want to sell please pm me .

  thanks
 
   John   

  

  Congratulations  Alex, Fiona, Ben and Zac
  on the new addition to the family.
  
  Looks like a FC wagon may be needed.  ;)


     Cheers

      John &  Alana  
      CJ  & Kate   :) :)