I HAVE A 179 FITTED IN MY FC, THE REAR MAIN SEAL LEAKS NON STOP , IVE REPLACED THE SOFT SEAL 3 OR 4 TIMES TOP AND BOTTOM. THIS WORKS FINE FOR A WHILE THEN THE LEAK RETURNS, . ANY IDEAS ON HOW TO FIX THIS PROBLEM ONCE AND FOR ALL. CAN A LATER TYPE OIL SEAL BE FITTED WITH MODIFICATION TO THE JURNALS???? IF SO WHAT IS INVOLVED.
- Welcome to FE-FC Holden Discussion Forum.
News:
Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
General Technical / Re: Brake lines
March 02, 2007, 12:13:31 PM
all brake tube must be seamless bundi tube i think its 1/4 inch from the master cyl. to booster and 1/8 for all other tubes the ends must be double flared
#3
General Technical / Re: Rear Indicators
March 02, 2007, 12:09:31 PM
ive used the red lens dye in a bottle, its hard to get an even coat and it fades and frosts over after about 6 months in the sun, ive only put it on the outside of the lens it may work work better on the inside a spray can sounds ok.
Pages1