FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: zulu on January 31, 2004, 09:18:35 AM



Title: WIRE WHEEL TRIMS
Post by: zulu on January 31, 2004, 09:18:35 AM
Giday all, I am looking for the wire wheel trims in the attached picture.
CASH REWARD, dead or alive any condition considered, reply with PM, here or email to botswana@bigpond.com all help appreciated.
Will take this opportunity to thank member customFC for posting pic of last wheel trims I was looking for, and found thanks to member ACE.
Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: fc_ute on January 31, 2004, 09:46:29 AM
does the standard fc hubcap still fit in the middle or do you just have the wire part and leave your nuts exposed? have seen this type of cap before but the hole in the middle is bigger


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on February 01, 2004, 04:20:26 AM
Exposed nuts? no :o no :o no, the hub cap remains in place, then the wheel trim fits over it, thus framing the hub cap.
Cheers


Title: Re: WIRE WHEEL TRIMS
Post by: 59er on February 02, 2004, 06:18:07 PM
Gazza, I saw some on" MY" car.Sorry mate but I like em too much . Cost about $350.00 to get them cleaned up and rechromed at Bluechrome. They did a good job. Good luck buddy. Kev..


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on March 15, 2004, 01:56:53 AM
Hi Kev, Only recently saw your cheeky reply  :'( well I now have 2, so cop that, if you see any more, you know where to send em.
Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: Glenn 'Stinky' Stankevicius on April 13, 2004, 05:52:36 AM
I was at a bloke's place today that has 2 of these trims, I didn't have a close look, but I am sure the dish was the opposite to the photo. Anyway, he reckons he will be listing them on ebay soon. If anyone wants any more info let me know and I will try to find out.


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on April 13, 2004, 01:39:17 PM
Hey Stinky, Were they 13 inch? I have seen them in both 14 & 15 inch since I have been looking. Any chance of a pic & or his phone no? thanks for keeping a lookout.
Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: FC0058 on April 15, 2004, 08:57:14 PM
Zulu
Thought I had found one for you. check it out any way but does not look the same.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=2473881880&category=29700


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on April 15, 2004, 09:11:41 PM
Yep, close Jim but no banana, thanks for keeping an eye out, have you ripped those doors off yet?
Gary


Title: Re: WIRE WHEEL TRIMS
Post by: Glenn 'Stinky' Stankevicius on April 17, 2004, 06:44:17 AM
Thanks Jim for the link,

Gary, they are the ones I am talking about, obviously not the right ones, oh well.


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on April 18, 2004, 07:50:05 PM
No Stinky, As per the original pic I posted, the ones I am looking for are a wire trim, not any kind of stamped trim, thanks anyhow.
Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: FC0058 on January 01, 2006, 10:31:36 PM
Hi Gary
Found this on eBay and immediately thought of you. It took me a while to find this post but here you go.

Cheers Jim

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=4601307344&ssPageName=ADME:B:SS:AU:1


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on January 01, 2006, 11:49:49 PM
Hey Jim, Thems the ones allright, i'll send him a message to see if he has any in 13 inch.
Thanks mate, Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: COL58FE on January 02, 2006, 02:52:48 AM
g'day gary,
                got two 13inch one's,but
chrome unknown as they've been
painted silver(no spinner's).not sure
on value make me a fair offer and
there your's,they are the one's off
this fc ;D ;D ;D
(http://img.photobucket.com/albums/v211/col58fe/gordonsFC.jpg)
                      cheer's col.


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on January 02, 2006, 08:50:51 AM
G'Day Col, Bit hard to make them out in that picture. Do they look like the one in the picture at the beginning of this thread? if yes, are they straight?
Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: COL58FE on January 02, 2006, 11:14:13 AM
g'day gary,
                they do have some minor
dent's in them as per pic's,there no
use to me as i'am using US RACER'S.
any they seem to look the same
except it appear's the outter trim's
might be missing compared to the
one in your pic.
             cheer's col.
(http://img.photobucket.com/albums/v211/col58fe/wiredressrims1.jpg)
(http://img.photobucket.com/albums/v211/col58fe/wiredressrims2.jpg)
(http://img.photobucket.com/albums/v211/col58fe/wiredressrims3.jpg)


Title: Re: WIRE WHEEL TRIMS
Post by: zulu on January 02, 2006, 12:25:15 PM
Col,They are similar but not the same, I will pm you re cost.
Regards, Gary


Title: Re: WIRE WHEEL TRIMS
Post by: COL58FE on January 05, 2006, 08:26:31 AM
these dress rim's on now sold. ;)