|
Title: Water pump square head nut Post by: Wookie 66 on September 22, 2020, 06:17:13 AM Good morning all
Where would I be able to get the square head nut that goes on the water pump it screws in to the water pump body between the top and bottom hoses Cheers Title: Re: Water pump square head nut Post by: Fraze on September 22, 2020, 07:58:31 AM There was a few on eBay a few days ago, cheers, Fraze
Title: Re: Water pump square head nut Post by: mcl1959 on September 22, 2020, 08:35:12 AM I have a few, there are two sizes. I’ll dig them up for you
Ken Title: Re: Water pump square head nut Post by: ardiesse on September 22, 2020, 10:17:21 AM Otherwise, Bunnings. I think they still sell cast-iron 1/2" BSP plugs.
(Proviso: I believe the fittings on Holden heads and water pumps were 1/2" NPT (American). The thread pitch is the same, but the profile's different. Use Teflon tape, or thread sealant). Rob Title: Re: Water pump square head nut Post by: Wookie 66 on September 22, 2020, 06:22:08 PM Hi guys
Yes I bought the 2 on eBay to find they fit the head but not the water pump The water pump one is small One should always measure and not assume Thanks mcl1959 I would be interested in the smaller size if you have them Cheers Title: Re: Water pump square head nut Post by: mcl1959 on September 23, 2020, 09:48:44 AM I’m sure this is the one. Check the dimensions on your pump.
(https://i.postimg.cc/LY24jdxp/DDE8-DFF1-EB24-42-C5-B367-8-FCC95-E3-FEFB.jpg) ($2) Ken Title: Re: Water pump square head nut Post by: Wookie 66 on September 25, 2020, 06:15:09 AM Hi Ken
Yes 15mm that the one Let me know the payment details Trevor 0423836647 |