FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: DnD on July 24, 2020, 01:17:44 PM



Title: Brake and Fuel pipe
Post by: DnD on July 24, 2020, 01:17:44 PM
Can anyone advise me of how much pipe I need to replace both the fuel and brake lines?  Dermot


Title: Re: Brake and Fuel pipe
Post by: Harv on July 25, 2020, 06:57:49 AM
If you bend pipe like I do, about twice as much as is installed in the car  ::) ;D

Flare line, forget to put flare nut on first.... remake line.
Bend line, make left hand bend instead of right... remake line.
Cut line to length and make it a little too short... remake line.

Cheers,
Harv


Title: Re: Brake and Fuel pipe
Post by: Patrick_R on July 25, 2020, 07:05:31 AM
Oh the memories Harv  :(

Been there and done that a few times.


Title: Re: Brake and Fuel pipe
Post by: Errol62 on July 25, 2020, 08:23:06 AM
Usually comes in 20’ length or roll. Roll is cheaper but straight length comes up nicer.


Sent from my iPad using Tapatalk


Title: Re: Brake and Fuel pipe
Post by: DnD on July 26, 2020, 06:30:01 PM
Thanks for the info .