FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: zulu on July 10, 2019, 12:26:06 PM



Title: Trimatic to suit 186 red motor wanted
Post by: zulu on July 10, 2019, 12:26:06 PM
Hi all

Would anyone out there have for sale a complete trimatic box to suit a 186 red motor
Im in Wollongong NSW but can travel

Thanks


Title: Re: Trimatic to suit 186 red motor wanted
Post by: my8thholden on July 11, 2019, 07:32:20 AM
Hi Zulu ..I have engine with transmission attached as was in car ..engine number starts 186P which is HT model I believe ..complete engine rocker cover to sump ,includes manifold ,dissy ,thermos housing ,balancer ,water pump ( its no good ) starter motor .NO carby or fuel pump ,I used them elsewhere....trimatic transmission complete ,no bits raided ,still on motor ,so torque converter to output shaft ..fluid is nice and clean ..it was running till engine stopped ,engine doesn't turn over ..I believe reason was lack of coolant NOT lack of oil ..my mobile 0405 703 413  ..NW Sydney ..call me if you want to ,Then I can send you images ..Vern ..   


Title: Re: Trimatic to suit 186 red motor wanted
Post by: Harv on July 11, 2019, 11:59:48 AM
..engine number starts 186P which is HT model I believe ..

Methinks 186P is HK. 186A for HR, 186X2 for HR HX blocks, 186H for HT/G, and 186S for HK/T/G 186S blocks.

Could be wrong though.

Cheers,
Harv


Title: Re: Trimatic to suit 186 red motor wanted
Post by: ardiesse on July 11, 2019, 03:25:55 PM
Harv,

The 186P prefix ran all the way through HK-T-G.  Got up to 400000 and some.

Rob


Title: Re: Trimatic to suit 186 red motor wanted
Post by: zulu on July 11, 2019, 05:04:12 PM

Thanks Vern
Message sent


Title: Re: Trimatic to suit 186 red motor wanted
Post by: zulu on July 26, 2019, 06:42:59 PM

Thanks all for the replies and offers of assistance, I have now located one
regards,Gary