|
Title: fc ute sill replacement Post by: Gary C on January 18, 2019, 07:05:31 PM I have replaced outer sills on my fc and fe sedans and now looking replacing both outer sills on me fc ute.
Thing is can you access from B pillar back to wheel arch from cutting old sill out from outside or do you need to turn yourself into a chimpanzee and access this section from inside ute? Title: Re: fc ute sill replacement Post by: Errol62 on January 18, 2019, 11:41:22 PM Hi Gary
You can cut off the old outer below the seam and drill out the spot welds from underneath, or grind and peel off. The hard part is re-joining the new sill. This has to be done from inside. It is made easier when the floor is out. The floor went in last in the factory I believe. Cheers Clay Sent from my iPad using Tapatalk Title: Re: fc ute sill replacement Post by: Gary C on January 19, 2019, 09:50:38 AM Thanks Clay I will give it a shot
Title: Re: fc ute sill replacement Post by: philwreck on January 19, 2019, 10:48:32 AM HI Gary
you might look at using panel glue just for that small section , have used it with good results. phil. |