FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: boss on December 06, 2017, 08:53:54 PM



Title: Tripple SUs
Post by: boss on December 06, 2017, 08:53:54 PM
Hi all,
Does anyone know if there is a inlet manifold that leans the tripple Su carbs foreword to get clearance between the carb and the firewall, I'm reluctant to modify the firewall but I'm not sure any manifold is going to give the required distance?

Boss


Title: Re: Tripple SUs
Post by: vmx-mxr on December 19, 2017, 08:46:36 AM
Warnerford triple mainfolds have the ports kicked in at either end meaning either minor or zero mods to firewall depending on model.

Grey motor ones are quite hard to find (they are out there) but red motor versions are relatively easyto pick up. Redline now list them and they are very good quallity items

www.redlineauto.com.au/p-181-redline-12-68-manifold-3-x-su-suit-holden-6cyl.aspx

Trust this helps

Dave Mac


Title: Re: Tripple SUs
Post by: boss on December 21, 2017, 03:28:43 PM
Thanks Dave
I did read on the net that the warnerford was made for clearance, only one person talked about this but it seams like I'm going to need more clearance than that?
my other alternative is to try and find a Kleining Manifold to suit twin SU carbs, Don't suppose anyone knows of one?

Boss