|
Title: Parts catalogue referencing Post by: Not Happy Jan on November 27, 2016, 08:03:34 AM Hi All
How do you find out what size the bolts are that secure the generator. I can't find any reference to them in the master parts catalogue. Don't know if I'm looking in the wrong place or they're not there! (https://s22.postimg.org/l0hx1ndfx/image.jpg) ($2) Thanks, Nick Title: Re: Parts catalogue referencing Post by: Dr_Terry on November 27, 2016, 08:23:19 AM I'm not sure if it's listed in your edition, but mine lists all the generator mounting bolts, nuts & washers (including their size) in section 2.275.
Dr Terry Title: Re: Parts catalogue referencing Post by: FCRB26 on November 27, 2016, 08:24:31 AM Pretty sure 5/16 UNF do you need the hex stub on the front of the engine ? i would have a full set up here.
(found them subframe bolts too they were second hand in the packet) Title: Re: Parts catalogue referencing Post by: Not Happy Jan on November 27, 2016, 11:26:30 AM Thanks Dr Terry. Found it,
Got the Hex stub. Thanks Pete. If you send me the sub frame bolts then stick those on too please that would be good. I have just found an old generator with the bolts on and they are half inch??? (https://s12.postimg.org/vk68wwx4p/image.jpg) ($2) Title: Re: Parts catalogue referencing Post by: mcl1959 on November 27, 2016, 04:17:16 PM Yes, 1/2 inch head size, 5/16 unf thread
Ken |