FE-FC Holden Discussion Forum

For Sale and Wanted => Other Stuff Wanted => Topic started by: Harv on August 22, 2016, 05:23:56 PM



Title: Commodore 26P rim or 15" space saver
Post by: Harv on August 22, 2016, 05:23:56 PM
Looking to get hold of either a Commodore 15" interceptor rim in 26P (26mm positive offset), or a 15" space saver.

The 26P rims were used on VP Berlina, VP and VR with ABS/IRS, VT Aclaim V6 and VQ Statey Series 1 (most Commodore 15" rims are 43P). The space savers were used on Monaros, though most got used as front runners until they were banned by many drag strips.

Need to use either of them as a spare wheel for the EK wagon V8 project. Happy to pay for wheel and freight.

Cheers,
Harv


Title: Re: Commodore 26P rim or 15" space saver
Post by: freddyc on August 23, 2016, 01:34:10 PM
I too am chasing these rims, I have managed to find two up here in the sunny north. Wreckers look you as if you are alien when you ask for 26p commodore rims.
fred


Title: Re: Commodore 26P rim or 15" space saver
Post by: Harv on September 10, 2016, 04:08:37 PM
Bump... still looking.

Cheers,
Harv


Title: Re: Commodore 26P rim or 15" space saver
Post by: FCRB26 on September 10, 2016, 07:53:41 PM
I have chasers laying around everywhere i shall check them all out.


Title: Re: Commodore 26P rim or 15" space saver
Post by: Harv on September 11, 2016, 05:40:17 AM
Thanks Pete - appreciated.

Cheers,
Harv


Title: Re: Commodore 26P rim or 15" space saver
Post by: Gordon on September 11, 2016, 10:43:08 AM
How do you tell what they are, Are the rims stamped 26P ? I have a few commo wheels here


Title: Re: Commodore 26P rim or 15" space saver
Post by: NES304 on September 11, 2016, 10:51:40 AM
They should but they'd be rare as rocking horse poo.
Checked all mine for you as well and no dice. Even the trailer !


Sent from my iPhone using Tapatalk


Title: Re: Commodore 26P rim or 15" space saver
Post by: Harv on September 11, 2016, 02:29:58 PM
Thanks gents.

Yep, the Commodore rims are all stamped, usually on the front face, near the edge of the rim (kinda where you would fit a lead wheel weight). The stamped numbers are typically something like 6 JJ 15 43P, and normally end in either 43P, or 26P... its the 26P ones that I need.

Cheers,
Harv


Title: Re: Commodore 26P rim or 15" space saver
Post by: Gordon on September 11, 2016, 08:54:58 PM
Got 8 rims here but all stamped 43p even though 4 come of a VR with IRS/ABS ?


Title: Re: Commodore 26P rim or 15" space saver
Post by: Harv on September 13, 2016, 06:53:24 AM
Thanks for looking -appreciated.

Cheers,
Harv


Title: Re: Commodore 26P rim or 15" space saver
Post by: fcwrangler on September 14, 2016, 04:55:04 PM
Just a thought Harv, have you looked at BMW rims? they have the same 5x120 spacing as the Commodores.
Jim


Title: Re: Commodore 26P rim or 15" space saver
Post by: Harv on September 15, 2016, 06:46:58 AM
Not yet, but its looking like I may need to.

Finding a BMW wrecker who doesn't want an arm and a leg could be fun though.

Cheers,
Harv


Title: Re: Commodore 26P rim or 15" space saver
Post by: Errol62 on September 15, 2016, 08:34:59 AM
Surely you could get 43p modified. I have had offsets changed on 13x7" chromies.


Sent from my iPhone using Tapatalk


Title: Re: Commodore 26P rim or 15" space saver
Post by: freddyc on September 15, 2016, 03:27:12 PM
CSW wheels in Adelaide will modify offset


Title: Re: Commodore 26P rim or 15" space saver
Post by: NES304 on September 15, 2016, 09:18:09 PM
What are you currently running on the rest of your corners if this is just for the spare?


Sent from my iPhone using Tapatalk


Title: Re: Commodore 26P rim or 15" space saver
Post by: Harv on September 16, 2016, 06:10:15 AM
All four corners are 26P (I robbed a VQ Statey that was being upgraded to mags). The fronts are critical, as 43P fouls the tie-rod ends. The rears are less critical.

There is a mob in Warwick Farm (not too far from me) that can change the offset of a 43P, though a factory 26P or space saver would make life easier.

Cheers,
Harv