Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: Rabbitoh on March 30, 2006, 10:23:53 PM

Title: FE wagon rear window
Post by: Rabbitoh on March 30, 2006, 10:23:53 PM
TRYING TO INSTALL NEW TAILGATE WINDOW SEAL IN FE WAGON.
CAN'T GET SEAL TO SIT RIGHT. DOES IT PULL ON FROM OUTSIDE OR INSIDE
Title: Re: FE wagon rear window
Post by: JB on March 31, 2006, 04:10:47 AM
I did mine from the inside. It was difficult and a tight fit with the new rubber. I put the new rubber aroung the screen first, then pushed the window to the lip and pulled the rubber over the lip using a rope about 6-7 mm thick. Not sure if it was the correct way, but it worked for me.

Cheers
Jason.
Title: Re: FE wagon rear window
Post by: mcl1959 on March 31, 2006, 07:57:34 AM
Absolutely correct Jason.  Some rubber grease or other lubricant will also help in getting the rubber to slide into the opening.

Ken
Text only | Text with Images