Print Page - HR steering on HR crossmember

Title: HR steering on HR crossmember
Post by: NES304 on February 26, 2006, 07:25:59 AM

Any one know how the steering connects up from HR into FC???
Any photos??? I think I may be missing a part (pitman arm)
Does the FC steering links fit or are they short??

Title: Re: HR steering on HR crossmember
Post by: RET on February 27, 2006, 11:41:07 PM

See point 5 of this excellent article on the topic (http://www.fefcholden.org.au/techinfo/tech002.html).

cheers
RET

Title: Re: HR steering on HR crossmember
Post by: Effie C on March 01, 2006, 08:38:17 PM

QuoteAny one know how the steering connects up from HR into FC???
Any photos??? I think I may be missing a part (pitman arm)
Does the FC steering links fit or are they short??

Nes
You will need the HR pitman arm, it fits in place of the FC one without any problems, the HR steering setup leaves the FC one for dead. Make sure your steering biox is up to shape and has no slop in it.

Title: Re: HR steering on HR crossmember
Post by: NES304 on March 03, 2006, 12:16:55 AM

yeah i found that missing a pitman arm doesnt help but cheers for the info

Title: Re: HR steering on HR crossmember
Post by: Fast_Eddie on March 03, 2006, 04:17:33 AM

You shall also need to reshape the sump slightly if you are running a grey motor.

Title: Re: HR steering on HR crossmember
Post by: NES304 on March 05, 2006, 11:06:58 AM

nope goin to run a black 202 efi to move the car around then hopefully in the future after the body rubbers and chrome are done then a V6

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: NES304 on February 26, 2006, 07:25:59 AM