I am after the doo-dad that goes on the back of the steering wheel that cancels the indicators.
I've got a HR column with a sports steering wheel, so I guess I'll need one from a HR.
Thanks.
Is this the same doo-dad fitted to HT's, etc?
Colin
I don't know ???, I have never seen one as I only bought the HR column, then I got the aftermarket wheel. I am tempted to call Holden as they have had a few other HR bits, but we all know what their prices are like, especially for little bits.
Hi Stinky, I have some in Brisbane if you can not get one nearer home, $50 plus postage.
Cheers, Lindsay.
nitrox(at)samford(dot)net
0412 884 060
I maybe on the wrong track here- you have the complete indictaor mechanism but the sports wheel boss is missing the cancel pins - Is this correct?
I had this problem and what I did was get an old HR wheel and remove the pins - measure the distance from the centre that they were located on as well as the O'Clock placing, then drill the sports wheel boss in the identical spots and insert the original HR pins (which by the way appeared to be a long roll pin so these would do as well)
Ken
Woops sorry Stinky I misread your post :-[ what mcl1959 has said sounds like the go for you, good luck with it, Lindsay.
Thanks guys, had absolutely no idea what would have been there.
Just looked at the original FC wheel that belongs on the wagon and can see some pins there. The sports wheel has some holes drilled and tapped already, so I will just need to get some pins in there.