Can anyone tell me if FB-EK Scuff Plates fit FE-FC bodies ?
I'm talking the metal plates that run along the bottom of the body where the doors close and hold down the carpet and body rubber.
Cheers
Mark
G'day Mark,
yes mate they do and will fit perfectlly.
cheer's col.
yes i believe they do fit, but they are slightly a diffferent shape!
torquefc,
i think you better check on
that one as they all have the same
sill's and floor pan's,so i can't see
them being different.except on the fe
they are flat on the top surface other
than that they are the same.
cheer's col. ;)
Hi Guys.
Torque is right. They are all slightly different, but they all fit. The FE is flat, like you said Col. FC is slightly different from FB & EK have inserts in them. NOT on the Commercials or Standards though.
Rob J
Thanks guys....the reason I asked, is I've foound a set of four for about $40 in good condition. Rares sell them at over $100 each brand new, and I can't find any good FC plates at that price, so I may end up buying the EK plates instead.
Cheers
Mark
Mark. i would strongly advise you not to buy them if you want to fit them to an fe fc. below is a picture (or two) of fc scuff plates, and fb ek ones , as you can see they are quite different. 1. the holes dont line up 2.i believe that even if you drilled more holes, they still wouldnt sit right.
(http://i3.photobucket.com/albums/y80/pro_058fc_350/fc-ek2.jpg)
(http://i3.photobucket.com/albums/y80/pro_058fc_350/fc-ek.jpg)
regards
Darcy
ps: i hope this helps ;)
THanks Darcy...big help !
Guess I'll just have to keep searching for FC ones or pay the asking price from Rares !
Thanks Again
Cheers
Mark
on ya torque,
i've been proved wrong
again,cool but i have learnt something
too.guess i should could would have
put somewhere in my post the word
(assume) ;D
cheer's col.
Say Mark, if they wont fit your car, any chance of a pm with contact details as they will fit my Ek! ;)
Matt