Hi everyone. Has anyone got fitting instructions or thoughts on where you place a brake booster on a FE/FC. I have access to one and don't want to drill or cut any unnecessary holes. I would like to put it in the position where it was intended to go.
Thanks in anticipation.
Rod
Hi Rod
I have my VH44 booster Fitted 585mm from the firewall to the back of the booster.It has 2 brackets one rear and one front. ;D Hope this helps.
Cheers,Graham :)
Hi Rod
I have the original NASCO instructions for fitting part no 7425375.The illustration is for FB/EK.There are six pages of detailed instructions
Can scan and email if you can use
Gary
Hi, ive stashed mine up under the drivers side guard,
out of view and the lines fit between the fire wall and y frame.My ol girls not on the road yet but i cant see any problems with it.Good luck....... Brad
Hi Rod
I installed a VB commodore dual diaphragm booster to the firewall of my FC using a bracket i made up that has the booster about 1"inch from the firewall and uses the existing master cylinder holes(looks very neat & tidy)
I know some people install HK boosters but the stock HK bracket has the booster a long way from the firewall & having remote boosters is ok but why do that when you can mount it directly to the firewall in FE/FC.
hope this helps
Glenn