Print Page - Wheel stud pattern

Title: Wheel stud pattern
Post by: fc_1958 on September 22, 2005, 07:10:43 AM

Am I right in assuming that the wheel stud pattern is the same from FE to HR?

and

What is the widest wheel that can be fitted to a FC with no mods?

Andrew ???

Title: Re: Wheel stud pattern
Post by: mcl1959 on September 22, 2005, 07:36:36 AM

Andrew, FE to HG are all the same stud pattern.

rim width on a stock car (not lowered either) would be limited to 6 inch with a normal profile tyre. Any wider rim and the rear wheels will hit the inner lip of the mudguard on bumps and the front wheel will hit the guard lip on full lock

Ken

Title: Re: Wheel stud pattern
Post by: fc_1958 on September 22, 2005, 08:32:11 AM

Thanks Ken. :)

Title: Re: Wheel stud pattern
Post by: greyside on September 22, 2005, 11:17:37 AM

yes but be careful mixing early and late on drum brakes u will warp drums

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: fc_1958 on September 22, 2005, 07:10:43 AM