FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: fe-ute56 on July 08, 2005, 01:08:57 AM



Title: heater hoses
Post by: fe-ute56 on July 08, 2005, 01:08:57 AM
could someone please tell me where the hoses connect to on engine 149 red ? also which one do i put an inline off on tap from heater to engine . thanks danny :)


Title: Re: heater hoses
Post by: fe-ute56 on July 08, 2005, 03:09:23 AM
i forgot to mention i have 2 outlets on left side of thermo housing 1 on the right plus 1 on the water pumpcheers danny :)


Title: Re: heater hoses
Post by: ACE on July 08, 2005, 03:21:27 AM
Hi Danny,
1 hose off the waterpump and 1 hose off the P/S rear of the cylinder head with inline tap is probably the neatest way.
Put the temp sender in the D/S thermostat housing.
The 2 outlets on the P/S thermostat housing are for a water heated manifold (i think) ;)
Hope this helps,
Regards ACE  8)


Title: Re: heater hoses
Post by: gp on July 08, 2005, 03:22:28 AM
Yes ACE, you're spot on.



Title: Re: heater hoses
Post by: fe-ute56 on July 08, 2005, 11:08:40 PM
thanks ace   cheers danny :)