Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: Burnsy on July 06, 2005, 05:14:50 AM

Title: Weber Carby Help
Post by: Burnsy on July 06, 2005, 05:14:50 AM
Ca anyone identify this Weber.  I bought this one off Ebay and now I need another.  Any info on what it might be off would be greatly appreciated.  It has 34DCHE21 A  stamped into the base of it.

(http://photobucket.com/albums/v232/EKBurnsy/weber01.jpg)

(http://photobucket.com/albums/v232/EKBurnsy/weber02.jpg)

(http://photobucket.com/albums/v232/EKBurnsy/weber03.jpg)
Title: Re: Weber Carby Help
Post by: FCwagon on July 06, 2005, 07:54:14 PM
Looks like it could be Cortina.
Leigh
Title: Re: Weber Carby Help
Post by: Blown_FC on July 06, 2005, 10:49:32 PM
Hey Burnsy....sorry, can't help on the type of carby or where to get one, other than to call REDLINE or check out website //www.redlineauto.com.au.

But without sounding negative, that photo shows the carby you have on it, to ( seemingly ) sit just over the half way mark of the manifold.    

Will a 2nd carby fit on without linkages or fuel inlets touching ???
Maybe it's just the angle of the photo, but looks close in the pics !

Hope you find what you are looking for !

Cheers

Mark
Title: Re: Weber Carby Help
Post by: Burnsy on July 07, 2005, 12:40:31 AM
Mark, you are right, they will be very close but I am hoping that with some luck I can fit two on.  After all it is what Thomas intended.  If they don't fit........well they is always ebay ;)

I have found out they are off a Fiat 125, something I know nothing about but there is aplace called the Fiat factory here in Perth that should be able to supply another.  Does anyone know if a Fiat 125 was 1250cc?
Title: Re: Weber Carby Help
Post by: Blown_FC on July 07, 2005, 12:53:06 AM
Don't think so Burnsy....although I know nothing abouot Fiats, but the website tells me there are models call Fiat 124,124,126,128 and so on, so I doubt that means 1240cc, 1250cc, 1260c ect.

Check out this site //wwww.fiatclubnsw.com or this one //www.carsfromitaly.com/fiat.

Cheers

Mark
Title: Re: Weber Carby Help
Post by: Burnsy on July 07, 2005, 01:17:03 AM
Thanks for the link Mark, it seems the 124 originally came out with a 1197cc engine that was later upgraded to a 1438cc and the 1608cc for the 125.  Hopefully the Fiat guy can shed some light on it for me.

I know that some early cortinas also had webers but most of them had the auto chokes and were larger carbies.
Title: Re: Weber Carby Help
Post by: -KIWI- on July 07, 2005, 05:00:13 AM
try these guys as well if ewe want
http://www.csl2003.co.nz/
cheers kiwi
Title: Re: Weber Carby Help
Post by: fcfromscratch on July 07, 2005, 11:34:04 AM
Hi Burnsy,

my White FC has a Weber on it, the pic of yours doesn't look very familiar but I will check it out.  In any case its coming off soon so that I can put on a WW Stromberg as that is what my manifold is to suit.....if it is what you want you are welcome to it.....

cheers....Brad
Text only | Text with Images