Print Page - help need wiper parts in qld

Title: help need wiper parts in qld
Post by: fcguy on July 01, 2005, 04:51:12 AM

hi all i am after two electric wiper parts the 'pivot arm' which comes off the wiper motor its measurements are 22.5mm then a 5mm step and 22.5 long again it has a keyway at one end and a tapered spline at the other also i am after the primary swing arm which is 70mm long with a keyway bolt that fits into the pivot arm and a sirclip type retainer on the other end pleas can anyone help?

Title: Re: help need wiper parts in qld
Post by: mcl1959 on July 01, 2005, 08:47:33 AM

fcguy - I am assuming you mean EK wiper motor parts ?

Ken

Title: Re: help need wiper parts in qld
Post by: fcguy on July 05, 2005, 07:12:40 AM

yeah mate thats correct you know anyone with any?

Title: Re: help need wiper parts in qld
Post by: mcl1959 on July 05, 2005, 09:34:43 AM

Unlikely you will find any not attached to a wiper motor, as they are essential part of it.

Usuall yyou can pick up a EK wiper motor at most of the swaps for about $50

Ken

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: fcguy on July 01, 2005, 04:51:12 AM