Hi All.
After getting it out & packing it for someone who wanted it, the sale has now fallen through. So, instead of burying it back in the shed, I have decided to see if anyone else wants it.
It is the "Deluxe" kit, with the coloured anodised inserts. All the trim strips are there & some of the mounting clips, but if I was to fit it, I would use new "Rare Spares" clips. They fit.
The inserts are faded & I am not sure if you can get them re-coloured, but I have sourced the exact same material, which is still redily available (They use it on & in buses & campers apparently).
This is a very rare kit indeed, as most were either the front or rear sections only & very rarely the entire kit with the inserts.
If you are serious about buying, email me.
I am in Tasmania, but postage is not a problem.
$350 including postage.
Rob J
Hi Rob Very interested, do you have any pics od car/s with them on?
Matt
fjboys@iinet.net.au
Hi Matt.
Here is a link to my photobucket site, where there are some photos of the kit.
http://photobucket.com/albums/v157/4hammers/Misc%20car%20pictures/
There is also a link to a discussion with picture of the same kit on another car.
http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=events;action=display;num=1116260680
Thanks,
Rob J
If you were going to get new inserts made, then it would not necessarily have to be used on a wagon any more, and could just as easily fit a sedan.
cheers
RET
Hi RET,
Yes, I realised after you said that, I haven't actually mentioned it is totally able to fit a sedan.
The only difference is the rear insert cutout & the rear inserts being a fraction longer (& I mean fraction!).
Thanks,
Rob J
Thanks for the info Rob, unfortunately I wont be able to get the kit from you, financials preclude me from buying vintage caravan and flash kit this month! voice of reason strikes again!
Cheers
Matt
Hi Rob,
is this item still for sale?
regards...Brad
Hi Brad.
Yes, Mate. Still for sale. I had forgotten I had put it up here.
I have sent you a PM.
Regards,
Rob J