Print Page - Torque settings (138)

Title: Torque settings (138)
Post by: Dave S on April 23, 2002, 12:25:05 AM

Just wondering if anyone has the torque wrench settings available on email for a 138 grey motor. I will need all the bottom end as well as the head etc.
Any help appreciated.

Title: Re: Torque settings (138)
Post by: RET on April 23, 2002, 01:09:57 AM

You'll find exactly what you're after here: http://www.fefcholden.org.au/techinfo/index.html

These settings are for the 132.5 grey motor, but I'd be very surprised if the 138 was different in this regard.

cheers
RET

Title: Re: Torque settings (138)
Post by: EJ_Dave on April 23, 2002, 11:41:46 AM

I just checked a workshop manual and Richard is correct that the FE, FC 132 grey has the same bottom end and cylinder head torque settings as the 138 grey.

David

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: Dave S on April 23, 2002, 12:25:05 AM