Print Page - Installing red motor fuel pump

Title: Installing red motor fuel pump
Post by: Dave_EH on March 30, 2005, 06:10:55 AM

Hi,

I have a new fuel pump to install in my 179. The manual says very little and makes it sound very easy, although it warns to make sure the pump sits on the lobe properly.

Are there any tricks to installing a new pump and is it really that easy? Should I use some bearing grease on the lobe?

Regards
Dave

Title: Re: Installing red motor fuel pump
Post by: Sarge on March 30, 2005, 07:48:36 AM

Dave
Yes it's that easy, a little grease wont hurt. Just when you push in make sure its flat and straight.

Cheers
Sarge

Title: Re: Installing red motor fuel pump
Post by: Dave_EH on March 30, 2005, 09:12:35 AM

Thanks Sarge... sounds good! Will give it a shot.

Cheers
Dave

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Dave_EH on March 30, 2005, 06:10:55 AM