|
Title: Warmaride heater install Post by: john116 on March 15, 2005, 03:20:03 AM Hey - just wondering where the water connecting points are on the grey motor to connect the Warmaride heater to.
One on the cylinder head, and one on the water pump? Thanks, John Title: Re: Warmaride heater install Post by: ACE on March 15, 2005, 04:07:36 AM Hi John,
If the grey motor you are talking about is in a FE or FC. One hose connects to the thermostat housing and one to the water pump. Regards ACE 8) Title: Re: Warmaride heater install Post by: john116 on March 16, 2005, 08:15:51 AM Hi - is actually for an FB, I know I'm in the wrong place, but no one ever answers questions on the FB website that I know of.
Thanks muchly! John Title: Re: Warmaride heater install Post by: ACE on March 16, 2005, 09:42:17 AM O.K John,
For a FB one hose goes to the rear of the cylinder head and the other hose goes to the water pump. ;) Regards ACE 8) Title: Re: Warmaride heater install Post by: earlyholdenfan on March 18, 2005, 12:39:01 PM Hi John, have one fitted to my EK, can send pictures for you or if you are in Brisbane would be only to happy to help you out or to show you
Matt Title: Re: Warmaride heater install Post by: john116 on March 18, 2005, 10:46:25 PM Matt - am in Sydney, pictures would be great. Thanks! Am new to the old car restoration thing - moved on from old radios and TV's. So a little different as well.
Thanks, John |