Print Page - Wilsonia Fitting Instructions.

Title: Wilsonia Fitting Instructions.
Post by: FC0058 on March 05, 2005, 01:43:32 PM

Hi Gents & Ladies

Can some one please email of fax me a copy of the fitting instructions for wilsonia guage.

I also have an alternator fitted to the car, so can I still hook up the Gen guage. ???

Cheers Jim

Title: Re: Wilsonia Fitting Instructions.
Post by: Dr_Terry on March 06, 2005, 01:10:32 AM

Hi FC0058.

Can't help you with the printed instructions for the Wilsonia gauges, but I can answer the other question, re:- the Gen gauge.

The Gen gauge is actually an ammeter, it measures the amps (current) going out of or into the battery.

Easiest way, if you want to do it yourself, is to borrow an HD or HR worshop manual & follow the wiring diagram in the X2 section, they have an ammeter wired with an alternator.

Dr Terry.

Title: Re: Wilsonia Fitting Instructions.
Post by: FC0058 on March 06, 2005, 03:20:41 AM

Dr Terry
Thanks for information. I will try and find someone with a diagram / manual.

Cheers Jim

Title: Re: Wilsonia Fitting Instructions.
Post by: Martin on March 06, 2005, 01:58:35 PM

Jim,

I don't have the instructions, but if you send me the guages I'll fit them in my car and show you at Jindabyne what I've done. ;D ;D

Martin

Title: Re: Wilsonia Fitting Instructions.
Post by: FC0058 on March 07, 2005, 09:04:06 AM

Martin,
Whats your address, I will pop it in the post tomorrow it should look good in Jim's dash.

Keep dreaming, you wish it was that easy.

Cheers Jim

Title: Re: Wilsonia Fitting Instructions.
Post by: customFC on March 07, 2005, 09:24:48 AM

Hey Jim.
Fitting instructions on their way.
Check your in box.
Regards
Alex

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: FC0058 on March 05, 2005, 01:43:32 PM