i've pulled the glovebox out (that was a silly thing to do ) now no amount of gaffa tape is going to hold it together .
what are the options for replacing it ? i'm not worried about being original. i was thinking of building a slightly bigger one to keep all my beachboy CDs in. whats the best/easiest material to work with ?
8) 8) 8)
8) 8) 8)surferboy...rex spares have repros for about $40
I have used a Rare Spares repro, good quality and fit, and look the part.
Cheers,
Craig.
If you are going to build a new one, then 6mm MDF would probably be the easiest material to work with.
I also had the thought for cd's but you will find that the wiper arm has not much clearance from the glove box, which stopped me from making one to fit.
Jason.
I made 1 out of steel. Used the old 1 as a template and folded and welded it together. It's basically 2 pieces. I also made an internal facia where I mount my CD player.
Covered inside with carpet.....looks and works sweet.
Regards
Alex
I made mine out of fibreglass. Just made a template one out of 6mm MDF white board. Then a little gelcoat and a few layers of glass.
Cheers
Sarge
Ya could try this guy - not used or seen the product but maybe what you're after, think he's in Melbourne
REPRODUCTION Glove Boxes, Kick Panels, Parcel Shelfs
Can copy yours
Phone: John 0411 316 13
I have several perfect original second hand ones , that I personally removed without damaging. $20 + post. Cheers SLIM