|
Title: door rubbers Post by: fe-ute56 on January 13, 2005, 09:40:54 AM could someone tell me how to fit front door rubbers . i have new rare spares ones that didnt come with instructions . my ute didnt have any on it to copy off .plus the inner seal has me stumped as to where it goes .i have read uteys threads but they didnt help much thanks :)
Title: Re: door rubbers Post by: Fast_Eddie on January 13, 2005, 10:28:45 AM The utes don't use the inner seal. The windlacing runs down the rear of the door opening.
You may need to do some slicing and splicing of the RS rubber around the top of the A pillar adjacent to the the dash/guard/windscreen junction, as they tend to bulge at this point. Finally, you shall need to ensure the scuff plate is fitted, as this forms the channel for the rubber across the bottom of the door. Hope this helps Regards Edward Title: Re: door rubbers Post by: fe-ute56 on January 13, 2005, 10:56:22 AM Thanks Edward you helped heaps. :) :)
Danny |