Hello,
I have 2 upper tailgates for wagon.
the FE/C upper has a lip for a seal on it lower edge.
the EK one doesnt.
For all intense purposes these both leak.
Does having this weather strip on the FE/FC item make a difference?
Or was the EK item improved?
any help/advice appreciated.
Cheers
Ed
Hi Ed,
You're right.....they both leak.
The FE wagon had the 2 part seals & FC onward had a single double lip seal, You can't use the later seal on the FE gate without removing the extra bit.
cheers,
Leigh
Thanks Leigh,
will use the FC/EK upper in that case, as seals may be easier to come by.
learnt something too FC/EK vs FE.
Cheers
Ed
Hi Ed,
there is a slight difference between a fc upper tailgate & an ek upper and that is its mounting point to the hinge.
the fc screws on with tapered screws and the tailgate upper has countersunk holes. The ek has normal holes and uses normal hex bolts. Just in case you want to keep yours stock ? :)
Regards Mick
not concerned about s..ss..sss..sss..sssstock. but learnt another thing about tailgates!
Cheers
Ed
Hey Ed,
Weld them both together hinged at the top llifted by gas struts. Gets rid of the hinges at the bottom and stops the leaks... Probably my next mod. ;D
Jason.
Hi Jas,
I'm actually very fond of the quirky FE - EK tailgates,
even the 2 position posts which hold the upper tailgate.
u cant get these cool things on a new wagon!
Cheers
Ed
You could, but your welding would have to be good on that thin metal!!!!!
;D ;D ;D
fatboys in the process of making his rear tailgates one
cheers fatboy
we want pics Fatboy!!!
your last pics never got uploaded???
If I were to have a one piece door I reckon a side hinged door would be the go, I think streetneat has pics of a hearse featuring this.
i still havent worked how to upload photos been busy getting my sons peddle car finished for christmas
cheers fatboy