|
Title: Heater question. Post by: customFC on November 01, 2004, 11:14:36 AM Anyone know anything about this heater?
Flow through heater with no fan. How good do they work. Looks like space for demister vents on the top. Is there any connections missing? (http://i12.ebayimg.com/01/i/02/bc/b4/17_1_b.JPG) (http://i1.ebayimg.com/02/i/02/be/2f/dc_1.JPG) Guy says it came out of an EH, so should be good for red motor. Regards Alex Title: Re: Heater question. Post by: Jodstar on November 14, 2004, 08:59:45 AM Hi Alex,I have the same heater. Mine was mounted under the dash with the two holes in the top for demister.Mine has a hole @4inch that a flexable hose connected to . It then went thru the firewall on the passenger side, out & around the carb to a mounting bracket using one of the thermostat bolts.It uses the engine fan to blow the air into the tube thus into the heater inside! As for the water, it was just two hoses with a cable operated tap for temp control,much the same as other heaters.
Cheers Jody.(Jodstar) |