|
Title: Quarter Light Seals Post by: utey on October 17, 2004, 08:52:45 AM How do you fit new seals?
Any advice appreciated. Nick Title: Re: Quarter Light Seals Post by: graham_fuller on October 17, 2004, 11:16:22 AM Nick,
You need to disassemble all the glass out of the door the bailie channels and then pull up the old seal at the base to reveal 2 screws.You need to remove these and the row of screws on the top edge of the door.You will need to drill out the rivet that pivots the window at the top once you have it out.Fit the new seal and refit all windows putting the quarter in first.The workshop manuel does a good job of explaining it . Cheers, Graham Title: Re: Quarter Light Seals Post by: utey on November 22, 2004, 12:41:44 PM Thanks
I'll have a go in the next couple of days. Nick |