|
Title: Fitting Electric wipers Post by: Tony FC5859 on August 11, 2004, 06:38:28 PM Hi, I'm just about to fit a reco 149 to my FC, and would like to fit electric wipers at the same time, I have the motor and the switch is this all I need ?, thanks for any help Tony :)
Title: Re: Fitting Electric wipers Post by: Brad on August 11, 2004, 11:22:04 PM GDAY TONY
I DID IT YEARS AGO ON AN FC THAT I USED TO OWN. I THINK THE SWITCH & MOTOR CAME FROM AN EJ THAT I FOUND IN THE BUSH. IF MY MEMORY IS CORRECT THE WHOLE LOT JUST FITTED STRAIGHT IN NO WORRIES. SO IF IT ALL LIGHNS UP YOU SHOULD BE OK. JUST MAKE SHURE THAT THE ACTUATING ARM ON THE BACK OF THE MOTOR IS THE SAME LENGTH AS THE OLD ONE OTHERWISE THE WIPPERS MIGHT TRY TO CLEAN THE MUDGUARDS. HOPE THIS HELPS. BRAD Title: Re: Fitting Electric wipers Post by: mickusmickus on August 12, 2004, 04:29:37 AM Hi
I did the electric wiper conversion for my FC last year. I got a two speed motor and switch on an FC Backing from KEN McLEAN one of the posters on this site. He shipped it to my door for $110 a mere morsal of the fee rare spares was going to charge me. I suggest you try Ken because the set up he sent me is flawless. Regards MICKUS |