Print Page - Engine number part 2

Title: Engine number part 2
Post by: collecta on June 20, 2004, 09:22:45 AM

Hi all,

just dragged out from under the bench
a grey with J86281 number, is this FE ?

Cheers
Scott

Title: Re: Engine number part 2
Post by: ACE on June 20, 2004, 09:28:54 AM

Hi Scott,
This motor was originally out of a EJ Holden. ;)
Regards ACE 8)

Title: Re: Engine number part 2
Post by: collecta on June 20, 2004, 09:54:39 AM

  cheers ACE,

  beginning to see a pattern here, b,fb
   j,ej these will b 138s
  whats L stand for.

  as both my fe/ fc have bloody fx/ fj motors no letters
   before number.

  cheers Scott

Title: Re: Engine number part 2
Post by: FE_STD_WAGON on June 20, 2004, 11:01:03 AM

Hi scott,
Engine numbers starting with "L" began at the introduction of the FE in July 56 and continued through to the end of the FC hope this helps

Regards Mick

Title: Re: Engine number part 2
Post by: collecta on June 20, 2004, 11:20:44 AM

  Thanks Mick,

   ill have to look through the rest of the greys ive got
   and find an L block to have machined.


   cheers
   Scott

Title: Re: Engine number part 2
Post by: Glenn 'Stinky' Stankevicius on June 20, 2004, 12:06:46 PM

Hey Scott, a little off topic, but you are missing a full-stop in your avatar. That's why it's not displaying properly
You have - img78photobucket.com
it should be - img78.photobucket.com

(http://img78.photobucket.com/albums/v292/collecta/th_P0001720.jpg)

FE-FC Holden Discussion Forum

General => General Board => Topic started by: collecta on June 20, 2004, 09:22:45 AM