G'day all ,
Ken can you help me here please? here is a pic of my steering column , i have all the bits in the steering wheeel for the horn, but am i missing part number 3 and 3a(from the manual), the part with the wire ? and where does it connect to?
Cheers Rusty
hi Rusty,
The part you refer to is the bakelite mounted Brass disc.This part screws to the front of the Black cover where the nut inserts are.
Cheers,
Graham
Cheers Graham, thanks fgor your help
Rusty
I will send these bits 2 youalong with the attaching screws
Regards Ken
G'day Ken,
You are an absolute champion mate, will be waiting for the postie,
Cheers Rusty
het rusty
coldnt help noticing your stick poking up out of the floor :-[ what box are you running? is it m20?
denis
g'day FE holden, it is a speco three speed (i think)
Cheers Rusty
;) ;) Hijack alert ;D ;D
Rusty,
Aren't all parts of an FE or FC 'horn stuff'? ;D ;D ;D
Cheers
Spinner
Yes spinner if it turns you on that way
Cheers Rusty
Hey Rusty, 8)
What gearbox are you using to keep the benchseat without any mods ???
cheers RUBBLE
Rubble ,it is a speco three speed
Cheers Rusty
Rubble and Rusty
A speco three speed is the shifter, attached to either the original three speed gear box or if tunnel is modified a later model three speed box. Speco is a brand of shifter not a brand of gearbox.
John M
Thanks effie ,as you can see i am no mechanic, it must be the original box then
Rusty
No worries Rusty,
I'm no mechanic either, just a refrigerated sparky. There was another brand of shifter available in the dim past called an impalla,this was a sraight line shifter not a H pattern unit like yours,I also seen a single piece of metal rod used to change gears a s well, not fancy but it worked.
John M
G'day effie,
Thats all i got a straight bit of rod to change gears , dont look too good but it works
Cheers rusty