I have recently acquired 2 FC utes;with the intention of making one good from both. Both have rotted out back trays. Is there an aftermarket supplier or is it a case of cutting and welding?
I'm in Bathurst area, NSW.
Are you talking about the floor under where the timber tray goes?
Cheers Geoff
yes sorry..Apart from a crossmember? over the diff and about six thin metal strips running from the back of the cab to the tailgate there is nothing.
P.B. the cargo area of a ute is a false floor...under that you should have a complete wgn floor including seat mountings...if thats all gone, id say you should look for another shell
cheers
trev
HI P/basher
  Check with "Steve" at Stockinbingal , near Cootamundra and see if he still has his for sale , he was a panelbeater "closing down"   Ph 6943-1581 ..
 He also had a sedan with a grey motor complete , don't know if he still has them for sale
  Norm  :)
ps there is a pic in "cars for sale" IF star photo is still working. ? ? ?
Thanks Norm
Rang the guy but all the parts/vehicles now gone! On the bright side found another one of the utes locally which isn't as badly rusted . Rust around driveshaft tunnel at base of cab and a little around fuel tank which I'm thinking should be repairable.